YATE TREKKER 3,8 grey/grey self-inflating mat
| Category: | SELFINFLATING MATS |
|---|---|
| Colour: | grey |
| Length: | 183 cm |
| Weight: | 850 g |
| Material: | polyester |
| Width: | 51 cm |
| Thermal resistance: | 4,0 |
| Thickness: | 3,8 cm |
| Valve: | reverse |
| EAN: | 8595053917686 |
slipping down from the mat.
| Material: | Top: polyester 75D |
| Colour: | Grey / Grey |
| Weight: | 850 g ( can vary ± 10%) |
| Size: | 183x51x3,8 cm |
| Size of pacage: | 14x26 cm |
| Thermal resistance: | 4,0 |
Guarantee of quality
Modern products are usually not only pleasant to the eye but also have many technical amenities and details which are hidden but dramatically improve quality of the product and make it unique. Self-inflating mats have three major quality factors 1) light weight 2) small size when packed 3) long lifespan.
This material must be not only light but also firm and durable. We also lighten the mat by using lightweight inner foam. However this is not done at the expense of comfortability and insulation qualities of the mat. The choice of material and the way of lightening of the mat has significant impact on the size of packed mat.
Self inflating mats
Instructions for use: Before use, remove all objects from the base under the mat, which could damage its surface, open the valve and unfold the mat.
The REVERSE valve is opened by pulling out and closes by pushing - see description of valve use below. The length of inflation depends on the method of storage before use. You can inflate the mat with your mouth or a special YATE pump (the pump will ensure that moist air does not enter the mat, which insulates less). Close the valve.
General information: Do not leave the mat inflated with the valve closed in direct sunlight and at high temperatures (above 30 ° C)! In these cases, you should always open the valve. If you use the mat in high temperatures, drop a little air to release the pressure. This will prevent possible damage to the product. Do not expose to direct fire!
Protect from sharp objects. Protect from contact with chemically aggressive substances (acids, caustics, solvents, repellents, fatty creams and other substances), which could damage the product. Store the mat dry and clean and dry place. Clean with soap and water. Tolerances of thickness and weight may vary 10%.
